Orion 280gx User Manual

ORION 220gx
Stereo Power Amplifier
40 Watts RMS
EQUIPMENT SUPPLIED
AMPLIFIER
LEFT
INPUT RCA
CONNECTOR
CHASSIS
GROUND
TERMINAL POWER
LUG FUSEHOLDER
POWER
LEAD
AUDIO
GROUND
LEAD
^ (For fl oating j
ground systems)
DIN
CONNECTOR
(In parallel with
RCA connectors,
includes Phantom
Power output)
RIGHT
INPUT RCA
CONNECTOR
GAIN CONTROL
(Both channels)
MOUNTING
HARDWARE
5 AMP FUSE
SPEAKER
CONNECTIONS
CABLE ASSY
DESCRIPTION
SPECIFICATIONS
The ORION 220 gx is a stereo power amplifier that
includes all the features of the larger ORION ampli¬
fiers and provides 20 watts RMS output per channel,
or 40 watts when bridged using ORION Bridging
Module 400 BDG (see fig. 7).
The 220gx can be used to greatly improve existing
factory sound systems utilizing 6x9 speakers. In
customized systems, the 220gx can be used to drive
tweeters and mid-range speakers in multiple ampli¬
fier applications.
Output Power Per Channel
with both channels driven
into 4 ohms @12 Vdc ... 20 WRMS
Distortion:
Typical.0.006%
Maximum.0.03%
Frequency Response.6 Hz to 30 KHz±0.5 dB
Signal to Noise Ratio.90 dB
Input Sensitivity.150 mV to 5 Vrms
Output Impedance.4 ohms to 16 ohms
Input Impedance.lOKohms
Remote Turn-on Current . . 50 mA
Current Consumption:
@ No Signal. 200 mA
@ Maximum Output .... 7 Amps
Voltage Requirements .... 10V to 16V
Damping Factor.Greater than 500
Output Section Slew Rate . 30V per microsecond
Stereo Separation.80 dB
Overall Dimensions.4 x 8.5 x 2.2 inches
3

Orion 280gx Specifications

General

Brand	Orion
Model	280gx
Category	Amplifier
Language	English