Osburn MATRIX User Manual

Matrix Insert Installation and Operation Manual
26 ______________________________________________________________________________
5.1.2 DOOR ADJUSTMENT
In order for your stove to burn at its best efficiency, the door must provide a perfect seal with the
firebox. Therefore, the gasket should be inspected periodically making sure to obtain an air tight
fit. Airtightness can be improved with a simple latch mechanism adjustment. To increase the
pressure on the gasket, remove one washer (B). To reduce pressure on the door, when putting a
new door gasket for example, put two washers. To adjust:
1. Unscrew the two screws (A) and remove/add one spacer (B).
2. Reinstall the handle guide with the screws (A)
5.1.3 REPLACING THE DOOR GASKET
It is important to maintain the gasket in good condition. After a year or more of use, the door
gasket will compress and become hard, which may allow air to leak past it. You can test the
condition of the door gasket by closing and latching the door on a strip of paper. Test all around
the door. If the paper slips out easily anywhere, it is time to replace the gasket.

Osburn MATRIX Specifications

General

Brand	Osburn
Model	MATRIX
Category	Indoor Fireplace
Language	English