Oster Master series User Manual

13
Using Your Blend-N-Go
®
Cup With Your Oster Master Series
Blender
Before washing ensure the blender is off and unplugged. Wash all components
except blender base with soapy water with a soft sponge and a bottle brush. Do
not use abrasive cleansers or sponges for cleaning. Rinse well and dry. Parts are
also dishwasher safe. Do not blend hot liquids.
Place desired ingredients into smoothie cup in the following order:
Liquids, fresh ingredients, frozen fruit, ice, yogurt and ice cream.
(Cut all firm fruits, vegetables and other foods into pieces no larger than 1/2-inch
(1.25 cm) by 2 inches (5.0 cm).
• Place Blade into Threaded Jar Bottom or adapter.
• Place sealing ring over blade assembly. Carefully press and tuck sealing ring into
locking groove. (See page 7 for more detailed instructions for blade assembly)
• Place blade assembly into cup. (See Figure 1 on Page 17)
• Be sure the Integrated Blade Assembly is tightened to the jar before using.
• Place cup assembly onto Blender base. (See Figure 2 on Page 17)
• Hold cup in position. Operate Blender according to the instructions in your
Blender User Manual. Blend until desired consistency.
• Place lid on cup and turn clockwise to tighten.
Enjoy your blended drink!
ALWAYS PLACE HAND ON CONTAINER
WHILE OPERATING BLENDER.

Oster Master series Specifications

General

Brand	Oster
Model	Master series
Category	Blender
Language	English