OWC Mercury Elite Pro Qx2 User Manual

MERCURY ELITE PRO Qx2
INTRODUCTION
2
1.4 FRONT VIEW
1.4.1 Front Features
1. Locking faceplate — Use the included keys to lock the faceplate for security, or re-
move the faceplate to gain access to the drive bays and configure the RAID mode.
2. LED indicators — See the following chart for information on the Qx2’s LEDs.
LED COLOR QX2 ON
QX2
SLEEPING
DRIVE
ACTIVITY
DRIVE BAD/
BAY EMPTY
DRIVE
REBUILD
Power Blue Solid blue Off Solid blue N/A N/A
Drive
(A, B, C, D)
Green/
Orange
Solid green
(all four)
Off (all four)
Flashing
green
Off
Flashing
orange
1.5 REAR VIEW
1.5.1 Rear Features
1. Kensington® Security Slot — Connect a security tether here.
2. eSATA (3.0Gb/s) port — Attach an eSATA cable here.
3. ON/OFF switch — Turn on and off the Mercury Elite Pro Qx2 here.
4. Power input — Connect the included power cable here.
5. FireWire 800 ports — Attach the included FireWire 800 cable to one of these ports
and to your computer. Use the second port to daisy chain other FireWire 800 devices.
1
2
3 4
5 6
1
2

OWC Mercury Elite Pro Qx2 Specifications

General

RAID levels	0, 1, 5, 10
Storage drive size	3.5 \
Maximum storage capacity	8 TB
Number of storage drives supported	4
Supported storage drive interfaces	Serial ATA II
FireWire 400	Yes
USB 2.0 ports quantity	1
Product color	Aluminum
Number of fans	1 fan(s)
Chipset	Oxford 936
Data transfer rate	3 Gbit/s
Cables included	eSATA, FireWire, USB