6
How to Select and Perform a Test
This is the basic procedure for all tests. For specific test details
please refer to the Test Instructions.
Lumiso
Pooltest
A Palintest Product
Lumiso
Pooltest
A Palintest Product
The test selection menu
appears when first starting
up Lumiso.
From most other screens,
pressing “back” once or
twice, will take you back to
the test selection menu.
Select a test, using the up and
down keys until the desired
test is highlighted.
These tube icons
will usually appear.
These indicate that the left
key is for “blanking” and
the right key is for “reading”
Please Note: The read icon
only appears after the blanking stage
has been completed. Lumiso will require
blanking to be repeated after 50
minutes or if it registers a significant
change in environmental temperature.
1
2
Blank Read
To Next Page
Loading...
Need help?
General
