- 5 -
OPERATION AND DIGITAL PROGRAMMER CIRCUIT TEST PROCEDURE
When you pluge the power supply cord into the wall outlet, microwave oven automatically enter into the state of lb / oz. If you want
to use g / kg state, please press Start pad after pluging the power source.
1. Press Inverter Turbo Defrost
pad.
2. Set the weight for 1 lb by press-
ing Number pads.
1 lb = 1 0
3. Press Start Pad.
4. Press Stop/Reset Pad twice.
Oven shuts off.
8. When 2nd stage cooking time has
elapsed, oven beeps 5 times and
shuts off.
Time of day or colon if set appears
in the display.
3. Inverter Turbo Defrost
OPERATION SCROLL DISPLAY
OPERATION
SCROLL DISPLAY
Time of day or colon if set appears
in the display.
4.23
1.0
1. Press Rice pad twice.
2. Press Start pad.
Cooking begins as time counts
down.
3. When cooking time has elapsed,
oven beeps 5 times and shuts off.
4. Inverter Auto Cooking
OPERATION SCROLL DISPLAY
15.00
2. Press Power Level pad once
to set High power.
(1st stage)
3. Set for 5 seconds by pressing
Number pads.
5 sec.= 5
4. Press Power Level pad 4 times
to set Medium power.
(2nd stage)
5. Set for 1 minute by pressing
Number pads.
1 min.= 1 0 0
6. Press Start pad.
7. When 1st stage cooking time has
elapsed. Oven beeps twice and
automatically switches to 2nd
stage cooking.
OPERATION
SCROLL DISPLAY
1. Plug the power supply cord into
wall outlet.
2. Press Clock pad.
3. Enter time of day (TOD) by press-
ing appropriate Number pads.
4. Press Clock pad. TOD has now
been resistered into the digital
programmer circuit and will count
up by minutes.
2. Time Cooking for Two Stage
OPERATION SCROLL DISPLAY
1. Place a water load in the oven.
88.88
11 25
11. 25
1.0 0
P 1 0
. 5
P 5
. 5
1.0 0
1. To Set Clock
1
Time of day or colon if set appers in
the display.
1. Press Auto Cook pad.
2. Press Number pads.
(Press 3 to select Bacon)
5. Auto Cook
OPERATION
SCROLL DISPLAY
3
6
To Next Page
Loading...
Need help?
General
