3
2 Specifications
2.1. Specifications*
2.2. Dimensions
General
Power Supply DC 12V (11V - 16V)
Test Voltage 14.4V
Negative Ground
Current Consumption Less than 2.1A (CD mode, 0.5W 4
channels)
Maximum Power Output 50W × 4 (at 1kHz), volume control
maximum
Tone Adjustment Range Bass: ±12dB at 100 Hz
Treble: ±12 dB at 10kHz
Speaker Impedance 4 - 8 Ω
Pre-amp Output Voltage 2.5 V (CD mode: 1 kHz, 0 dB)
Pre-amp Output Impedance 200 Ω
Dimensions (W×H×D)** 178×50×160mm
{7” × 1-15/16” × 6-2/16”}
Weight** 1.3 kg {2 lbs. 14oz}
Front AUX Input
Input Impedance
Allowable External Input
Connector
10 kΩ
2.0 V
3.5 mm Stereo mini-pin
Disc Player
Sampling Frequency 8 times Oversampling
DA Converter 1 bit DAC System
Pick-Up Type Astigma 3-beam
Light Source Semiconductor Laser
Wave Length 790 nm
Frequency Response 20 Hz - 20 kHz (±1 dB)
Signal to Noise Ratio 96 dB
Total Harmonic Distortion 0.01 % (1 kHz)
Wow and Flutter Below Measurable Limits
Channel Separation 75 dB
FM Stereo Radio
Frequency Range 87.9 MHz - 107.9 MHz
Usable Sensitivity 10.2 dBf (0.9 µV, 75 Ω)
50 dB Quieting Sensitivity 15.2 dBf (1.6 µV, 75Ω)
Frequency Response 30 Hz - 15 kHz (±3 dB)
Alternate Channel Selectivity 75 dB
Stereo Separation 35 dB (at 1 kHz)
Image Rejection Ratio 55 dB
IF Rejection Ratio 100 dB
Signal to Noise Ratio 62 dB
AM
Frequency Range 530 kHz - 1710 kHz
Usable Sensitivity 27 dB/µV (22µV, S/N 20 dB)
* Specifications and the design are subject to possible modification
without notice due to improvements.
** Dimensions and Weight shown are approximate.
*** Above specifications comply with EIA standards.
To Next Page
Loading...
Need help?
General
