Unit Indoor Unit Outdoor Unit
Fan Motor Description Cross-flow Fan Propeller Fan
Material AS + Glass Fiber 20% PP Resin
Type Induction (4-poles) Induction (6-poles)
Input W 60.5 - 66.0 66 - 74.8
Rated Output W 15 30
Fan Speed Low rpm Cooling; 780 - 780
Heating; 840 - 840
—
Medium rpm Cooling; 960 - 960
Heating; 960 - 960
—
High rpm Cooling; 1,160 - 1,160
Heating; 1,270 - 1,270
800 - 830
SuperHigh rpm Cooling; 1,270 - 1,220
Heating; —
—
Heat Exchanger Description Evaporator Condenser
Tube material Copper Copper
Fin material Aluminium (Pre Coat) Aluminium (Blue Coat)
Fin Type Slit Fin Corrugated Fin
Row / Stage (Plate fin configuration, forced draft)
2×15 2×23
FPI 19 17
Size (W × H × L) mm 610 × 315 × 25.4 585.7
557.1
× 484 × 36.4
Refrigerant Control Device — Capillary Tube
Refrigeration Oil (cm
3
) — ATMOS M60 OR SUNISO 4GDID
Refrigerant (R22) g (oz) — 730 (25.8)
Thermostat — —
Protection Device — Overload Protector
Capillary Tube Length mm — Cooling; 890, Heating; 890
Flow Rate l/min — Cooling; 9.5, Heating; 9.5
Inner Diameter mm — Cooling; 1.5, Heating; 1.5
Air Filter Material
Style
P.P.
Honeycomb
—
Capacity Control Capillary Tube
Compressor Capacitor µF, VAC — 30 µF, 370VAC
Fan Motor Capacitor µF, VAC 1.5 µF, 440VAC 2.0 µF, 440VAC
Note:
• Specifications are subjected to change without prior notice for further improvement.
9
CS-A7DKD CU-A7DKD / CS-A9DKD CU-A9DKD / CS-A12DKD CU-A12DKD /
To Next Page
Loading...
Need help?
General
