Panasonic EP-MA10 User Manual

E10
English
SETTING UP THE MASSAGE LOUNGER
1. Where to use the unit
Ensure there is adequate space to recline.
Do not expose the massage lounger to direct sunlight or high
temperatures, such as in front of heating sources, because this can
cause discoloration or hardening of the synthetic leather.
Place the unit on a mat to prevent floor damage.
When placing a mat under the unit, the size of the mat should be
sufficient (at least 120
cm × 70 cm) to cover the areas where the unit
touches and where the legrest could touch the floor, as shown in the
diagram on the right.
Install the unit near a power outlet.
See Warning No. 10 and 12 on page E3.
•
•
•
•
•
Keep at least 10 cm away from the wall.
Approx. 181 cm
Width approx. 82 cm
Approx.
32 cm
Approx.
25 cm
Mat
Area
where legrest
could touch the floor
Area where unit
touches the floor
2. Removing everything from the box and installing the unit
Fabric
Section
Groove
Hold
the cloth
section on the
backside
MatLegrest Bac
k cover
Place your
fingers in the
groove
Since the unit is v
ery heavy (approximately 65 kg), be
careful to avoid back injuries. (The unit must be carried
by two persons.)
When using the wheels to move the unit, place a mat
on the floor to protect the floor surface.
To put the unit down on the floor
Put the unit down slowly and carefully watch your step.
Put down the legrest by holding it with your hands until
it has been set on the floor completely. If you release
your hands before the legrest is fully extended, the
legrest will forcefully return to the initial position.
•
•
•
•

Panasonic EP-MA10 Specifications

General

Brand	Panasonic
Model	EP-MA10
Category	Massager
Language	English

Summary

Important Safety Instructions

Grounding Instructions

Control Panel

Control Panel Buttons

Detailed explanation of each button on the control panel for operation.

Control Panel Display

Setting Up the Massage Lounger

Choosing Use Location

Assembly

Before Sitting Down

Area and Power Checks

Powering On

Selecting a Menu and Starting the Massage

Power On and Program Selection

Turning on the unit and choosing automatic massage programs.

Adjusting Shoulder Position

Fine-tuning the position of massage heads for optimal shoulder targeting.

Manual Operation for the Upper Body

Manual Massage Selection

Turning on the unit and selecting specific upper body massage techniques.

Adjusting Upper Body Massage

Customizing massage head position, width, and intensity for the upper body.

Manual Operation for the Leg

Leg Function Activation

Adjusting Leg Intensity & Auto Shut-off

Troubleshooting

Operational Faults & Stoppages

Addresses issues like massage heads stopping, illumination/sound problems, and unit malfunction.

Movement & Power Issues

Troubleshooting reclining, legrest movement, unit operation, and power problems.

Error Display

Error Codes and Meanings

Explains common error codes displayed by the unit and their corresponding issues.