Basic Operations
15
Answering calls using
the base unit (KX-
TGP550 only)
1 Lift the corded handset or press ]
or {s} when the unit rings.
2 When you finish talking, place the
corded handset on the cradle. When
the speakerphone is used, press
{s}.
Adjusting the base unit ringer
volume
■ While the base unit is ringing for an
incoming call:
Press {^} or {V} repeatedly to select
the desired volume.
■ Programming the volume
beforehand:
1 K (middle soft key) i
{#}{1}{6}{0}
2 {V}/{^}: Select the desired
volume.
3 M i {b}
Hold
This feature allows you to put an outside
call on hold.
1 Press H during an outside call.
2 To release hold, press H or {C}.
1 Press {a} during an outside call.
L If you are using the corded
handset, you can place it on the
cradle.
2 To release hold, lift the corded
handset, or press {a} or {s}.
Transferring calls
Outside calls can be transferred to:
– another unit
– an outside party
Using the handset
Transferring calls to another unit
1 During an outside call, press 1.
2 {V}/{^}: “Intercom” i M
3 {V}/{^}: Select the desired unit. i
]
4 Wait for the paged party to answer.
L If the paged party does not
answer, press {C} to return to
the outside call.
5 {i}
Transferring calls to an outside party
1 During an outside call, press 1.
2 {V}/{^}: “Transfer” i M
3 Dial the phone number.
L To correct the number, press W
to clear the number and enter
again.
4 Wait for the paged party to answer.
L If the paged party does not
answer, press W 2 times to
return to the outside call.
5 i
Y Handset
: Base unit
Available for: KX-TGP550
To Next Page
Loading...
Need help?
General
