VQT3T96 (ENG)
22
Taking Pictures using the Automatic Function
(Intelligent Auto Mode)
In this mode, the camera makes the optimal settings for the subject and scene, so we
recommend it when you wish to leave the settings to the camera and record without
thinking about them.
Press [¦].
• [¦] button will light up when it is switched to Intelligent Auto Mode.
[
¦] button is turned off during recording to prevent the light reflecting
on glass or similar, but this is not a malfunction.
• [¦] button is turned off when it is pressed again, and it will be set to
the [REC] Modes selected by the mode dial.
• Defocus control can be set by touching [ ] on the recording screen
and then touching [ ].
• When the subject is touched, AF Tracking function works.
∫ Scene Detection
When the camera identifies the optimum scene, the icon of the scene
concerned is displayed in blue for 2 seconds, after which its color
changes to the usual red.
DMC-GX1X&GX1K&GX1PP-VQT3T96_eng.book 22 ページ ２０１１年１０月１３日 木曜日 午後２時５４分
To Next Page
Loading...
Need help?
General
