15
SQT1404 (ENG)
Basics
Shutter button (Taking pictures)
1
Press the shutter button halfway (press lightly) to
focus on the subject
• The aperture value and shutter speed are displayed. (If the
aperture value and shutter speed are shown in red and flashing,
you do not have the appropriate exposure, unless you are using
the flash.)
Focus display
( When focus is aligned: illuminated
When focus is not aligned: flashing)
Aperture value
Shutter speed
2
Press the shutter button fully (push the button all
the way), and take the picture
●
Pictures can be taken only when the image is correctly focused as long as
the [Focus/Release Priority] is set to [FOCUS].
■
Estimated number of recordable pictures
1450
(When [Aspect Ratio] is set to [3:2], [Quality] is set to [ ], [Picture Size] is set to [L] (20M),
and using a card of 16 GB)
■
Check the picture you have taken
• [Auto Review] displays the pictures you have taken after taking still pictures.
• Press the [
] (Playback) button to display the picture. (→36)
To Next Page
Loading...
Need help?
General
