Application (Record)
Changing the aspect ratio of the still pictures
- 122 - VQT4J11
Automatically changing the aspect ratio while taking pictures
[Aspect Bracket]
When you press the shutter button once, the camera automatically takes four
pictures with four types of aspect ratios (4:3, 3:2, 16:9, and 1:1). (The shutter
sounds only once.)
Select [Aspect Bracket] from [Rec] menu
• For the setting procedures of the menu. (→25)
Use cursor button to select [ON] and press [MENU/SET]
The range that can be recorded
for each aspect ratio is displayed.
●
The same shutter speed, aperture value, focus, and the same [Exposure], [White
Balance] and [Sensitivity] settings are used for the four pictures.
●
Aspect Bracket is disabled when the recordable number of pictures is three or less.
●
When Aspect Bracket is set, [Auto Bracket] and [Burst Shooting] are canceled.
●
[Aspect Bracket] cannot be used in the following cases:
• [Creative Control] Mode ([Toy Effect] [Miniature Effect] [Soft Focus] [Star Filter]
[Smooth Defocus] [Radial Defocus])
• Scene Modes ([Panorama Shot] [Handheld Night Shot] [HDR] [3D Photo Mode])
●
Cannot be used in the following cases:
• During motion picture recording
• When the [Quality] setting is set to [ ], [ ] or [ ]
To Next Page
Loading...
Need help?
General
