7
TQBJ2086
Overview of controls
Main unit
A Standby/on switch [1]
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
B Adjust the volume level (~12)
C Select the input source
D Select the Bluetooth
®
device as the source
To start Bluetooth
®
pairing, press and hold [ ].
E MUSIC indicator
F CINEMA indicator
G HDMI (ARC) indicator
H OPTICAL indicator
I (Bluetooth
®
) indicator
J Remote control sensor
Distance: Within approximately 7 m
Angle: Approximately 20° up and down, 30° left
and right
K OPTICAL DIGITAL AUDIO IN terminal
L USB port (for software update) (~16)
M HDMI (ARC) terminal (ARC compatible)
Active subwoofer
[HTB258] [HTB250]
The I/D SET button is only used when the main
unit is not paired with the active subwoofer.
Front
Rear
WIRELESS LINK
indicator
TQBJ2086_en.fm Page 7 Wednesday, December 27, 2017 2:30 PM
To Next Page
Loading...
Need help?
General
