- 15 -
Getting Started
Firmware updates
This unit is capable of checking the rmware
automatically when connected to the Internet via
a broadband connection.
When a new rmware version is available, the
following message is displayed.
Firmware Update
Current Version: X.XX
New Version: X.XX
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.jp/support/global/cs/
Yes No
OK
RETURN
*
Select “Yes” to start downloading the rmware.
You cannot operate the unit until the update is
complete. Don’t remove the AC adaptor during
the update. Removing the AC adaptor while the
update is in progress may damage the unit.
After the rmware is installed, unit will restart and
the following screen will be displayed.
The firmware has been updated.
Current Version
:
x.xx
RETURN
*
y
You can also download the latest rmware from the
following website and store it to a USB device to
update the rmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
When the update is complete, turn off and on the unit.
y
To show the rmware version on this unit.
(
27, “Firmware Version Information”)
y
Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
* “X.XX” represents the rmware version number.
To Next Page
Loading...
Need help?
General
