17
3. Before loading paper, please unfold the stacked paper to avoid a paper jam or feed error, and
then load the paper into the tray print-side down. An optional tray can hold up to 550 pieces of
80g/m² paper.
4. Raise the output tray to avoid the printed paper from slipping and falling, or immediately remove
the printed document after the printing is complete.
• If more than 550 pieces of paper (80g/m²) are put inside the optional tray at one time, it
will lead to paper jam or paper feed failure.
• For single-sided printing, please make sure that the side to be printed (the blank side)
faces down.
To Next Page
Loading...
Need help?
General