Paradox SP6000 User Manual

Communicator
Test Report
Auto Arm
Erase Lost Remote Controls
System Options
Step Action Details
1
[] + [
MASTER CODE]
The [ ] key will flash. [PARTITION MASTER CODE] may also be used.
2 [MEM]
3 [3] = Personal Phone #1
[4] = Personal Phone #2
[5] = Personal Phone #3
[6] = Personal Phone #4
[7] = Personal Phone #5
[8] = Pager #
4 [PHONE #] + [ENTER] Enter phone # (up to 32 digits) and press [ENTER]. Goes to next phone#, or go to step 5 if
[8] = Pager # was selected.
5 [MESSAGE] + [ENTER] Step 5 for Pager # only. Enter pager message and press [ENTER].
Step Action Details
1
[] + [
MASTER CODE]
The [ ] key will flash. [PARTITION MASTER CODE] may also be used.
2 [MEM]
3 [9] Send a test report to the monitoring station.
Step Action Details
1
[] + [
MASTER CODE]
The [ ] key will flash. [PARTITION MASTER CODE] may also be used.
2 [BYP]
3 [1] = Auto arm (partition 1)
[2] = Auto arm (partition 2)
4 [HH:MM] Enter time (24Hr clock).
5 [1] = Regular arm
[2] = Sleep arm
[3] = Stay arm
Step Action Details
1
[] + [
MASTER CODE]
The [ ] key will flash. [PARTITION MASTER CODE] may also be used.
2 [BYP]
3 [3]
4 [ALL REMOTES] + [ENTER] Press a button on all remotes. Press [ENTER].
5 Press and hold [SLEEP] (3sec) Press and hold [SLEEP] to erase all lost remotes.
Step Action Details
1
[] + [
MASTER CODE]
The [ ] key will flash. [PARTITION MASTER CODE] may also be used.
2 [BYP]
3 [4] = Regular arm
[5] = Sleep arm
[6] = Stay arm
Toggle to have the siren squawk on arm/disarm with keypad.
Toggle to have the siren squawk on arm/disarm with remote.
Toggle to have no exit delay when arming with remote.

Paradox SP6000 Specifications

General

Brand	Paradox
Model	SP6000
Category	Security System
Language	English