EasyManuals Logo
Home>Parkside>Lawn and Garden Equipment>282463

Parkside 282463 User Manual

Parkside 282463
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
22 GB/IE
Note: If the
display
16
flashes, irrigation is
not possible. Irrigation which may be occurring will
be interrupted.
Programming will be saved for 2 minutes. If chan-
ging the batteries takes longer, all settings must be
selected again.
Troubleshooting
This product contains delicate electronic components.
For this reason, it may be disrupted by transmissions
from transmitters in the direct vicinity.
Note: Electrostatic discharge can cause malfunc-
tions. If this happens, briefly remove the batteries
from the battery compartment
10
and reinsert them
again after 10 minutes. The product will be fully re-
set. The product will then be ready for use again.
Note: Please note that all settings will be deleted if
the product is reset.
Error Possible
Cause
Solution
No notifica-
tions on the
display
No batteries
inserted
Insert batteries
The batteries
are dead
Replace the
batteries
Irrigation will
not start
The tap is
closed
Open the tap
Wrong pro-
gramming
Check the
programming
No batteries
or dead
batteries
Insert batteries
or replace the
batteries
Cleaning and Care
Attention! Potential damage to the product.
Moisture entering the product may result in damage.
Ensure no moisture enters the battery compartment
10
during cleaning to prevent damaging the product
beyond repair.
Only clean the housing with a slightly damp
cloth and mild washing-up liquid.
Never use petrol, alcohol or other aggressive
cleaning agents to clean the housing.
Cleaning the filter
The filter
11
must be regularly checked and
cleaned if necessary.
Close the tap.
Allow the product to run dry by manual irrigation.
Unscrew the union nut
1
from the tap or
adapter thread.
Remove the conical filter from the water inlet
in the union nut.
Clean the filter.
Reinsert the filter.
Screw the union nut onto the thread of the tap
or adapter.
Open the tap.
Storage
Close the tap.
Loosen the hose from the coupling
13
.
Allow the product to run dry.
Loosen the union nut
1
.
Remove the batteries.
Store the product in a dry and frost-free environ-
ment.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Parkside 282463 and is the answer not in the manual?

Parkside 282463 Specifications

General IconGeneral
BrandParkside
Model282463
CategoryLawn and Garden Equipment
LanguageEnglish

Related product manuals