Dust extraction (see Fig. I)
The tool features a dust extraction nozzle
6
to vacuum off dust.
Insert the adapter
19
in the extraction nozzle
6
.
Connect a vacuum cleaner to the adapter
19
.
Continuous tool operation
Locking the ON / OFF switch
4
:
Activate the ON / OFF switch
4
.
Press the locking switch
1
and release the
ON / OFF switch
4
.
Unlocking the ON / OFF switch
4
:
Activate the ON / OFF switch
4
and release.
Maintenance and Cleaning
The device requires no maintenance.
Clean the unit promptly after use.
Clean the device with a dry cloth, never use
petrol, solvents or cleaning agents harmful to
plastic.
Always keep the vents clear.
Remove dust clinging to the sander with a brush.
Service
Always have your
device repaired by qualified specialist
personnel using only original manu-
facturer parts. This will maintain the safety
of the device.
If the plug or mains
lead needs to be replaced, always
have
the work performed by the manufac-
turer or its service centre. This will maintain
the safety of the device.
Warranty
The warranty for this appliance is for 3
years from the date of purchase. The ap-
pliance has been manufactured with care
and meticulously examined before deliv-
ery. Please retain your receipt as proof
of purchase. In the event of a warranty
claim, please make contact by telephone
with our Service Department. Only in this
way can a post-free despatch for your
goods be assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile compo-
nents, e.g. buttons or batteries. This product is for pri-
vate use only and is not intended for commercial use.
The warranty is void in the case of abusive and im-
proper handling, use of force and internal tamper-
ing not carried out by our authorized service branch.
Your statutory rights are not restricted in any way
by this warranty.
The warranty period will not be extended by repairs
made unter warranty. This applies also to replaced
and repaired parts. Any damage and defects extant
on purchase must be reported immediately after
unpacking the appliance, at the latest, two days after
the purchase date. Repairs made after the expiration
of the warranty period are subject to payment.
GB
Service Great Britain
Tel.: 0871 5000 720
(0,10 GBP/Min.)
e-mail: kompernass@lidl.co.uk
IAN 79032
IE
Service Ireland
Tel: 1890 930 034
(0,08 EUR/Min. (peak)
0,06 EUR/Min. (off peak))
e-mail: kompernass@lidl.ie
IAN 79032
Operation / Maintenance and Cleaning / Service / Warranty
To Next Page
Loading...
Need help?
General
