Parkside PAAS 12 A1 User Manual

■ 26
│
GB
│
MT
PAAS 12 A1
CORDLESS GARDEN SAW
PAAS 12 A1
Introduction
Congratulations on the purchase of your new appli-
ance. You have selected a high-quality product. The
operating instructions are part of this product. They
contain important information on safety, usage and
disposal. Before using the product, please familiar-
ise yourself with all operating and safety instruc-
tions. Use the product only as described and for the
specified areas of application. Please also pass on
these operating instructions to any future owner.
Intended use
This appliance – standard designation: reciprocat-
ing saw – is intended for the sawing of wood,
plastics and building materials up to a fixed stop
(base plate). The appliance is suitable for rough
sawing work, straight and curved cuts; it cuts sur-
faces off flush. With the grip bracket mounted, the
appliance is suitable for sawing branches. Follow
the information concerning saw blades and prac-
tical advice on sawing. Any other uses of or modi-
fication to the appliance is deemed to be improper
and carries the risk of serious personal injury. The
manufacturer accepts no responsibility for dam-
age(s) attributable to misuse. The appliance is not
intended for commercial use.
Features
Safety lock-out
Handle
Battery pack
Release (battery pack)
ON/OFF switch
Saw blade (SWISS MADE)
Base plate
Quick-release chuck
Hand guard
Release (grip bracket)
Grip bracket
High-speed battery charger
Control LED (green)
Control LED (red)
Battery charge level display
Package contents
1 cordless garden saw PAAS 12 A1
1 high-speed battery charger PLGK 12 A1
1 battery pack PAPK 12 A1
1 grip bracket
1 saw blade for wood 152 mm / TPI 6
(SWISS MADE)
NOTE
► TPI = teeth per inch = the number of teeth per
2.54 cm
1 carrying case
1 set of operating instructions
Technical data
Cordless garden saw: PAAS 12 A1
Rated voltage: 12 V
(DC)
Rated idle speed: n
0
0–2700 rpm
Stroke length: 20 mm
Max. cutting performance: Wood 80 mm
Battery pack: PAPK 12 A1
Type: LITHIUM ION
Rated voltage: 12 V
(DC)
Capacity: 2.000 mAh / 24 Wh
High-speed
battery charger: PLGK 12 A1
INPUT:
Rated current:
220 - 240 V
~
, 50-60 Hz
(alternating current)
Rated power consumption: 50 W
OUTPUT:
Rated voltage: 12 V
(DC)
Rated current: 2400 mA
Charging time: approx. 60 min.
Fuse (internal): 2 A
T2A
Protection class: II / (double insulation)

Parkside PAAS 12 A1 Specifications

General

Brand	Parkside
Model	PAAS 12 A1
Category	Saw
Language	English