Parkside PHP 500 E3 Translation Of The Original Instructions

PHP 500 E3
■ 2
│
GB
│
IE
│
NI
HOT GLUE GUN PHP 500 E3
Introduction
Congratulations on the purchase of your new
appliance. You have selected a high-quality
product. The operating instructions are part of this
product. They contain important information about
safety, usage and disposal. Before using the
product, please familiarise yourself with all oper-
ating and safety instructions. Use the product only
as described and for the range of applications
specified. Please also pass these operating instruc-
tions on to any future owner.
Intended use
This appliance is intended for gluing wood, card-
board, packaging, PVC, carpet, seals, plastics,
leather, ceramics, glass and fabric with hot-melt
adhesive. The material to be glued must be clean,
dry and free of grease. Any other usage of or
modification to the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse. The appliance is
not intended for commercial use.
Features
1 Feeder shaft
2 Control lamp for the mains connection
3 Mains connection table station
4 Table station with appliance cradle
5 Trigger
6 Plastic stand
7 Drip tray
8 Nozzle
9 Thermal protection for nozzle
0 Mains connection glue gun
q Power cable
Package contents
1 hot glue gun
1 table station with appliance cradle
1 mains cable
1 plastic stand
3 glue sticks
1 carrying case
1 set of operating instructions
Technical details
Rated voltage 230V ∼, 50 Hz
(alternating current)
Rated power consumption 25 W (starting at
500W)
Heating time approx. 2 min.
Protection class II /
(double shielded)
This mark confirms that the product
complies with the product safety
requirements applicable in the UK.

Parkside PHP 500 E3 Specifications

General

Brand	Parkside
Model	PHP 500 E3
Category	Glue Gun
Language	English