Content
Introduction .................................. 4
Intended Use ................................. 4
General Description ....................... 5
Scope of delivery ................................5
Overview ...........................................5
Technical Data ............................... 6
Notes on Safety ............................ 7
Symbols .............................................7
General safety instructions for power tools..8
Correct handling of the battery charger ..10
Additional safety instructions ..............11
Charging the battery ................... 13
Remove/insert rechargeable battery ....13
Recharging the battery ......................13
Used batteries ..................................14
Checking the charge status of the
rechargeable battery .........................14
Operation ................................... 14
Replacing the appliance attachment ....14
Switching on/off ...............................15
Motor unit with drill attachment PKGA1 ..15
Motor unit with multi-sander attachment
PKGA2 ............................................16
Motor unit with sabre saw attachment
PKGA3 ............................................16
Motor unit with multifunction tool
PKGA4
............................................17
Practical tips ............................... 18
Sawing ............................................18
Sanding ...........................................18
Scraping ..........................................18
Cleaning/Maintenance ................ 18
Cleaning ..........................................19
Maintenance ....................................19
Storage ....................................... 19
Waste Disposal/
Environmental Protection
............ 19
Guarantee .................................. 20
Repair Service ............................. 21
Service-Center ............................. 21
Importer ..................................... 21
Spare Parts/Accessories .............. 22
Trouble Shooting ......................... 23
Translation of the original EC
declaration of conformity ............ 69
Exploded Diagrams ..................... 71
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product. During production,
this equipment has been checked for qual-
ity and subjected to a nal inspection. The
functionality of your equipment is therefore
guaranteed.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise
yourself with all of the operating
and safety instructions. Use the
product only as described and for
the applications specied. Keep this
manual safely and in the event that
the product is passed on, hand over
all documents to the third party.
Intended Use
The appliance is intended for screwing
screws in and out and for drilling holes in
wood, metal or plastic.
The add-on tools are intended for grinding,
sawing and scraping.
The device is not suitable for commercial
use.
Any other use that is not explicitly ap-
proved in these instructions may result in
damage to the equipment and represent a
serious danger to the user.
The equipment is designed for use by
adults. Adolescents over the age of 16
may use the device only under supervision.
The manufacturer is not liable for damages
caused by unspecied use or incorrect op-
eration.
To Next Page
Loading...
Need help?
General
