Application
The appliance is intended for domestic
wet and dry vacuuming in, for example,
the house, work room, car or garage. The
appliance can also be used as a blower or
to suction up water. This equipment is not
suitable for commercial use.
Vacuuming of ammable or explosive
materials or those which endanger health
is prohibited. The manufacturer will not be
held responsible for injuries resulting from
use which does not comply with the direc-
tions, or from incorrect use.
General description
The illustration of the principal
functioning parts can be found on
the front and back foldout pages.
Contents
Unpack the appliance and check that it is
complete.
The appliance is supplied with the motor
head tted (
1). To remove the motor
head, open the securing clips (
10).
Dispose of the packaging material properly.
1 Motor housing
2 Carrying handle
6 Waste container
7 4 feet with castors and acces-
sory ttings
12 3-part vacuum tube
13 Vacuum hose with handle
15 Foam lter
16 Material lter (already mounted)
17 Paper lter bag
18 Floor nozzle with
20 Crevice nozzle
6 cross-head screws
Instruction Manual
Overview
Housing
1 Motor housing
2 Carrying handle
3 On/off switch
4 4 attachment ports for accesso-
ries
5 Suction connection
6 Waste container
7 4 feet with castors and acces-
sory ttings
8 Cable holder
9 2 mains cable
10 Locking clips
11 Blower connection
Accessories
12 3-part vacuum tube
13 Vacuum hose with
14 Handle component
Filter
15 Foam lter for wet vacuuming
16 Material lter for dry vacuuming
(already mounted)
17 Paper lter bag to vacuum
coarse dirt
Nozzles
18 Floor nozzle with
19 Turnable insert attachment
with brush and rubber lip, for
vacuuming carpets and smooth
surfaces
20 Crevice nozzle
21 Filter basket
22 Flaps on the paper lter bag
23 Intake connections
24 Sealing ring
25 Lip on the suction pipe
To Next Page
Loading...
Need help?
General
