Parkside PWSA 20-Li C3 - English; Table of Contents

PWSA 20-Li C3
GB
│
IE
│
NI
│
1 ■
Contents
Introduction ............................................................2
Intended use ........................................................................2
Features ...........................................................................2
Package contents ....................................................................3
Technical details .....................................................................3
General power tool safety warnings ....................................... 4
1. Work area safety ..................................................................4
2. Electrical safety ...................................................................4
3. Personal safety ....................................................................4
4. Power tool use and care ............................................................5
5. Use and handling of the cordless electrical power tool .....................................5
Safety instructions for all applications ....................................................6
Kickback and corresponding safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Special safety instructions for grinding and abrasive cutting ...................................8
Additional special safety instructions for abrasive cutting .....................................8
Safety guidelines for battery chargers ....................................................9
Permissible accessories ................................................................9
Storage and handling of the recommended accessory tools ..................................10
Working procedures .................................................................10
Before use ............................................................11
Charging the battery pack (seefig.A) ...................................................11
Attaching/disconnecting the battery pack to/from the appliance ..............................11
Checking the battery charge level ......................................................11
Fitting the protective cover for cutting ....................................................11
Adjusting the blade guard ............................................................12
Fitting the additional handle ...........................................................12
Fitting/changing the roughing/ cutting disc ...............................................12
Operation ............................................................13
Switching on and off ................................................................13
Adjusting the rotational speed .........................................................13
Maintenance and cleaning ...............................................14
Disposal ..............................................................14
Kompernass Handels GmbH warranty ....................................15
Service ...............................................................16
Importer .............................................................16
Translation of the original Conformity Declaration ...........................17
Ordering a replacement battery ..........................................18
Telephone ordering .................................................................18