USER MANUAL
Peplink Balance Series
http://www.peplink.com -49 / 227 - Copyright © Peplink
7.3 Configuring the Network Environment
To ensure that your Peplink Balance works properly in the LAN environment and can access the Internet
via the WAN connections, please refer to the following setup procedures:
LAN Configuration
For basic configuration, refer to Section , Basic Configuration.
For advanced configuration, refer to Section ,
Cellular WAN
Network>WAN> Click on Detail
(Available on the Peplink 30 LTE only)
IMSI
This is the International Mobile Subscriber Identity which uniquely identifies the SIM card.
This is applicable to 3G modems only.
MEID
The Pepwave MAX supports both HSPA and EV-DO.
For Sprint or Verizon Wireless EV-DO users, a unique MEID identifier code (in
hexadecimal format) is used by the carrier to associate the EV-DO device with the user.
This information is presented in hex and decimal format.
ESN
This serves the same purpose as MEID HEX but uses an older format.
IMEI
This is the unique ID for identifying the modem in GSM/HSPA mode.
To Next Page
Loading...
Need help?
General
