Return to Table of Contents
STEP 5.
STEP 6.
STEP 7.
STEP 8.
STEP 9.
Residential Refrigeration
and Front Venting Commercial Refrigeration
Service Manual
(16) #10 x ¾” Wood screws.
NOTE: Choose fasteners for proper thickness of
overlay material.
Loosely attach the four corners of the overlay
panel with the door frame.
Make sure the overlay panel is aligned properly
with the door.
After alignment is satised, fasten down all the
screws through the screw holes.
When re-installing the gasket, make sure the dart
is pressed inside the slot on the door frame. Start
at the four corners and rmly press your way
inwards.
Replacement Parts Page 9-9
To Next Page
Loading...
Need help?
General
