Pfaff 1213 User Manual

Raise
both spool pins and
place a spool of
thread
on one of them.
Simply place the
bobbin on bobbin winder
disc S where it is
held
in
position magnetically
(see
ill, at leffl.
Pass the
thread
from the spool to
the bobbin,
as shown in the above illustration,
Wind the
thread clockwise around
the bobbin
a few times.
Push lever
E
against
the bobbin, hold the
balance wheel,
and turn the
stop motion
knob of Pfaft machines
1213 and 1214
(8a
I
The
bobbin winder
stops automatically
when
the bobbin
is full,
To re-engage
the sewing
mechanism
after
bobbin
winding,
turn the stop motion
knob
away
from
you. The sewing
mechanism is
re-engaged
automatically
on starting the
machine,
On the
Pfaff 1222-E,
the sewing
mechanism
is
engaged or
disengaged
by
the
Stopmatic
control.
For details
please
refer to page 17.
to wind
the bobbin and
disengage
the
sewing
mechanism:
on page
2>
toward
you. Start the bobbin
winder
by
pressing
down on the
foot
control.

Pfaff 1213 Specifications

General

Brand	Pfaff
Model	1213
Category	Sewing Machine
Language	English