Pfaff 28 User Manual

4. Winding
the Bobbin
All PEAFF 28
machines are
equipped with
a
table winder
which hos
proved
very useful
in all sewing
shops.
As
shown
in
photo
3,
place
spool
1
on
pin
2,
and the
empty bobbin
on
spindle 6. Pass
the thread from
spool 1
through the
hole
3,
between
tenson
discs
4, over
pin 5,
and
through
the slot in the face
of the bobbin. By press
ng down
engaging
lever 7,
the bobbin
winder pulley
is pushed
over against
the
belt of the
machine
and
the
winder
is engaged.
Now start
the machine.
When
the bobbin
is filled, the
throw-off lever
8
will
stop the bobbin
winder
automatically.
The empty bobbin
is taken out of the
machine,
the
full
bobbin
removed
from the
spindle
and
the thread torn
off. Then the full bobbin
is
inserted
in
the
machine
and the empty bobbin
placed on
the
spindle for
rewinding.
This way,
a
considerable time
saving
is
effected
since a
full bobbin is at
hand at any
time.
Also the operators
of machines with
disengageable balance
whel
will
profit
from
this ideal way
of winding the
bobbin,
I
Photo
3
4

Pfaff 28 Specifications

General

Brand	Pfaff
Model	28
Category	Sewing Machine
Language	English