Pfaff hobbylock 4762 User Manual

The
sewing foot can
be
raised and
lowe
red with sewing foot
lift
32.
The maxi
mum vertical lift of 6 mm
for the sewing
foot for particularly thick
fabrics can be
achieved
by
also
depressing
the
sewing
foot
lift towards the back.
After finishing a seam, continue to sew
a
thread chain of 15 — 20 cm. Pull
the
thread chain
towards the
front over
thread
chain cutter 23. The thread chain wilt thus
be cut.
Changing the sewing foot
Switch off at the mains switch
To remove: Raise the
needle(s)
to the
highest position and lift the sewing foot.
Press the white lever at the rear of the
sewing foot holder. The sewing foot will
be
released automatically from the holder
and can
be
removed to the left. To
do
this,
lift the spring slightly.
To insert: Lift the spring
slightly
and
insert the sewing foot under the holder
so
that when the sewing foot lever is lowe
red, the pin of the foot locks into the
sewing foot holder.
Check: Please lift the sewing foot lever to
ensure
that the sewing foot is
properly
locked into place.
Sewing foot lift
Thread chain
cutter
19

Pfaff hobbylock 4762 Specifications

General

Brand	Pfaff
Model	hobbylock 4762
Category	Sewing Machine
Language	English