21
EVOLV SHIFT XTINSTALLING AIO LIQUID COOLER
A 240 AIO liquid cooler can be installed in the top in the ‘Liquid Cooled’
Conguration.
1. Install the 240 radiator and 2x fans on top of the radiator bracket.
(directing the exhaust through the top is recommended)
2. Make sure the tubing and pump unit is guided as shown.
3. Mount the pump unit onto the CPU.
4. Run the cables along the hinge at the front of the chassis so the radiator
bracket can still be lifted up.
8x
REQUIRES:
The total clearance for radiator+fan thickness is 60mm
Running the fan cables along the hinge at the front
allows the radiator bracket to still be lifted up.
To Next Page
Loading...
Need help?
General
