When you switch off the shaver, the LOW light
ashes a few seconds.
Charge the shaver when the LOW light goes on.
Do not charge the appliance in a closed pouch.
It takes approx. 60 minutes to fully charge the
battery.
When you charge the shaver for the rst time or
after a long period of disuse, let it charge for 12
hours.
Tip: To optimise the battery capacity, fully charge the
shaver and then use it normally until the battery is
completely empty. Repeat this process three times in a
row. If you optimise the battery capacity in this way, you
can also charge the shaver in between shaves, even if
the battery is not completely empty yet.
A fully charged shaver provides up to 17 cordless
shaves.
If you have a heavy beard, the shaver may provide
less than 17 cordless shaves. The shaving time may
also vary over time, depending on your shaving
behaviour, cleaning habits and beard type.
1 Put the small plug in the shaver.
2 Put the adapter in the wall socket.
The CHARGE light goes on.
Note: You can also use the appliance without charging.
Simply connect the appliance to the mains.
-
,
ENGLISH 9
To Next Page
Loading...
Need help?
General