You can store the channel on the current channel
number or as a new channel number.
Select Store and press OK. The new channel number is
shown briefly.
You can redo these steps until you have found all
available analogue TV channels.
Satellite
Search for Satellite and Satellite Settings
(Home) > Settings > Install Channels > Satellite
installation > Search for satellite
Re-install all channels
(Home) > Settings > Install Channels > Satellite
installation > Search for satellite > Reinstall channels
• Select the group of channels you want to install.
• Satellite operators can offer channel packages that
bundle free channels (free-to-air) and offer a sorting that
suits a country. Some satellites offer subscription
packages - a collection of channels you pay for.
Connection type
Select the number of satellites you want to install. The TV
sets the appropriate connection type automatically.
• Up to 4 Satellites - You can install up to 4 satellites (4
LNBs) on this TV. Select the exact number of satellites
you wish to install at the start of the installation. This will
speed up the installation.
• Unicable - You can use an Unicable system to connect
the antenna dish to the TV. You can select Unicable for 1
or for 2 satellites at the start of the installation.
LNB settings
In some countries, you can adjust the expert settings for
homing transponder and each LNB. Only use or change
these settings when a normal installation fails. If you
have non-standard satellite equipment, you can use
these settings to overrule the standard settings. Some
providers might give you some transponder or LNB
values which you can enter here.
• Universal or Circular - The general type of LNB, usually
you can select this type for your LNB.
• Low LO Frequency / High LO Frequency - The local
oscillator frequencies are set to standard values. Adjust
the values only in case of exceptional equipment that
needs different values.
• 22 kHz Tone - By default, the Tone is set to Automatic.
• LNB Power - By default, LNB Power is set to Automatic.
Automatically Search for Channels
(Home) > Settings > Install Channels > Satellite
installation > Automatic channel update
If you receive digital channels, you can set the TV to
automatically update the list with new channels.
Alternatively, you can start a channel update yourself.
Automatic channel update
Once a day, at 6 AM, the TV updates the channels and
stores new channels. New channels are stored in the All
channels list but also in the New channels list. Empty
channels are removed.
If new channels are found or if channels are updated or
removed, a message is shown at TV start up. The TV must
be in standby to automatically update channels.
* Only available when Satellite channel list is set to From
a sorted package
Channel Update Message
(Home) > Settings > Install Channels > Satellite
installation > Channel update message
When new channels are found or if channels are
updated or removed, a message is shown at TV start up.
To avoid this message to appear after every channel
update, you can switch it off.
Automatic Update Option
(Home) > Settings > Install Channels > Satellite
installation > Automatic update option
Unselect a satellite if you do not want to update
automatically.
* Only available when Satellite channel list is set to From
a sorted package
Manual Installation
(Home) > Settings > Install Channels > Satellite
installation > Manual installation
Manually install satellite.
• LNB - Select the LNB for which you want to add new
channels.
• Polarisation - Select the polarisation you need.
• Symbol rate mode - Select Manual to enter symbol rate.
• Frequency - Enter the frequency for the transponer.
• Search - Search for transponder.
20
To Next Page
Loading...
Need help?
General
Weight and Dimensions
