Audio Out Settings
(Home) > Settings > Sound > Advanced > Audio out
Set the TV to play the sound on TV or on the connected
audio system.
You can select where you want to hear the TV sound and
how you want to control it.
• If you select TV Speakers, the TV speakers are always
on. All the sound related settings are applicable to this
mode.
• If you select Wired headphones, the sound will be
played through headphones.
• If you select Optical, the TV speakers are switched off
and the sound will be played through the device
connected to Digital Audio Out - Optical.
• If you select TV Speakers + Wired headphones, the
sound will be played through TV speakers and
headphones.
With an audio device connected with HDMI CEC,
select HDMI sound system. The TV will switch off the TV
speakers when the device is playing the sound.
To adjust the volume of TV speakers or headphones,
press Volume and press the arrows (right) or (left) to
select the output source you want to adjust.
Press Volume + or - to adjust the volume level of selected
output source.
eARC
eARC setting
(Home) > Settings > Sound > Advanced > eARC
Set eARC mode to Automatic or Off. HDMI eARC
(Enhanced Audio Return Channel) is an advancement
over the previous ARC. It supports the latest high-bitrate
audio formats up to192kHz, 24-bit, and uncompressed
5.1 and 7.1, and 32-channel uncompressed audio.
HDMI eARC is only available on HDMI 1.
Digital Output Settings
Digital output settings are available for SPDIF output
(optical) and HDMI ARC sound signals.
Digital out format
(Home) > Settings > Sound > Advanced > Digital out
format
Set the audio out signal of the TV to fit the sound
capabilities of the connected Home Theatre System.
• Stereo (uncompressed): If your audio playback devices
have no multichannel sound processing, select to only
output stereo content to your audio playback devices.
• Multichannel: Select to output multichannel audio
content (compressed multichannel sound signal) or
stereo audio content to your audio playback devices.
• Multichannel (bypass): Select to send original
bitstream from HDMI ARC to the connected HDMI Sound
System.
- Make sure your audio playback devices support Dolby
Atmos feature.
- SPDIF output (DIGITAL AUDIO OUT) will be disabled
when streaming Dolby Digital Plus content.
Digital out levelling
(Home) > Settings > Sound > Advanced > Digital out
levelling
Adjust the loudness level from device which is connected
to digital audio output (SPDIF) or HDMI.
• Select More to have louder volume.
• Select Less to have softer volume.
Digital out delay
(Home) > Settings > Sound > Advanced > Digital out
delay
For some Home Theatre Systems you might need to
adjust the audio sync delay to synchronise the audio to
the video. Select Off if a sound delay is set on your Home
Theatre System.
Digital out offset (Only available when Digital out
delay set to On)
(Home) > Settings > Sound > Advanced > Digital out
offset
• If you cannot set a delay on the Home Theatre System,
you can set the TV to sync the sound.
• You can set an offset that compensates for the time
necessary for the Home Theatre System to process the
sound of the TV picture.
• You can set the value in steps of 5ms. Maximum setting
is 60ms.
Dolby Atmos Notification
(Home) > Settings > Sound > Dolby Atmos
Notification
Switch On or Off the Dolby Atmos notification when
Dolby Atmos content begins to play on your TV.
35
To Next Page
Need help?
General
Weight and Dimensions
