Philips 9000 series Frequently Asked Questions

3. The wireless charger beeps and the ring on the pad lights up when the shaver is correctly placed
and connected for charging.
4. Charging your shaver on the Qi pad can take approximately 3 hours. Once charged, you can keep
your shaver on the Qi pad as long as you want to. This does not affect its battery or performance.
Quick charge: After approximately 18 minutes charging, the shaver contains enough energy for one
shave.
Charging Philips Shaver S8000 models with a wireless Qi pad
1. Connect the USB cable to the wireless Qi pad and then plug it in the wall.
2. Place the shaver vertically on the charging pad. The charging pad will beep when the shaver is
correctly placed on it.
When the shaver is charging, the charging indicator on the shaver flashes white. Once the battery is
fully charged the charging indicator will light up white continuously.
4. How do I remove the shaving heads of my Philips shaver?
To deep clean your Philips Shaver, you need to know how to replace the shaving heads of your
shaver. Follow the instructions below on how to do this. Please keep in mind that the instructions for
your specific shaver may be different. It is best to consult your user manual for details.
Removing and reattaching your Philips shaving head
Switch off your shaver and follow the steps below.
1. Pull the shaving head holder off the body of the shaving unit.
2. Twist the retaining rings inside your shaving head holder and pull them out one by one.
3. Remove the shaving heads from the shaving head holder.
4. Each shaving head consists of a cutter and a guard. Please keep in mind that the cutter and guard
are not interchangeable. So make sure you keep them together.
5. Put the shaving heads back into the shaving head holder.
6. Reattach the shaving head holder to the bottom part of the shaving unit.

Philips 9000 series Specifications

General

Brand	Philips
Model	9000 series
Category	Electric Shaver
Language	English