2 If the temperature light goes on after you have moved the iron, wait
for it to go out before you start ironing.
Note: If the temperature light does not go on after you move the iron, the
soleplate still has the right temperature and the iron is ready for use.
Cleaning and maintenance
Cleaning
1 Set the steam control to position 0, remove the plug from the wall
socket and let the iron cool down.
2 Wipeakesandanyotherdepositsoffthesoleplatewithadamp
cloth and a non-abrasive (liquid) cleaning agent.
To keep the soleplate smooth, avoid hard contact with metal objects.
Never use a scouring pad, vinegar or other chemicals to clean the
soleplate.
3 Clean the upper part of the iron with a damp cloth.
4 Regularly rinse the water tank with water. Empty the water tank
after cleaning.
You can use the Calc-Clean function to remove scale and impurities.
Use the Calc-Clean function once every two weeks. If the water in your
area is very hard (i.e. when akes come out of the soleplate during ironing),
use the Calc-Clean function more frequently.
1 Set the steam control to position 0, remove the plug from the wall
socket and let the iron cool down.
2 Fill the water tank to the maximum level.
Do not pour vinegar or other descaling agents in the water tank.
3 Set the temperature dial to the maximum temperature.
4 Put the mains plug in an earthed wall socket.
5 Unplug the iron when the temperature light goes out.
6 Hold the iron over the sink, press and hold the Calc-Clean button
and gently shake the iron to and fro.
Steam and boiling water come out of the soleplate. Impurities and
akes(ifany)areushedout.
7 Release the Calc-Clean button when all the water in the tank has
been used up.
8 Repeat the Calc-Clean process if the iron still contains a lot of
impurities.
1 Put the plug in the wall socket and let the iron heat up to allow the
soleplate to dry.
2 Unplug the iron when the temperature light goes out.
,
ENGLISH8
To Next Page
Loading...
Need help?
General