Getting started
1. Unlock the bottle
Clean the bottle except for the cap with mild detergent by hand
or in the dishwasher (max 50℃). Rinse the cap with clean water.
Screw on the cap, press and hold the UV-C activation button
for 3 seconds to unlock the bottle for the first time.
The indicator light will flash blue, telling you the bottle is
ready to use.
2. Power up
Connect the USB cable with the charging port on the cap,
and plug the USB into any USB wall charger until the battery
is fully charged.
Notes: DO NOT charge with any USB cable other than the
USB cable provided with the bottle.
Slowly-flashing green light
Charging
Steady green light
Fully charged
Steady orange light
Low battery, please recharge the bottle as soon as possible.
Pulsing red light*
Out of battery
Steady red light
Something is wrong. Visit www.philips.com/water for
troubleshooting and support.
* When the bottle is out of battery, it will be off completely.
Please recharge and unlock the bottle according to step 1.
1
EN
3s
To Next Page
Loading...
Need help?
General
