HD7863/10 / HD7864/11
3. The lid cover is still fi xed with two snap locks C, which
can be reached with a screwdriver from the backside of the
appliance. (see pictures)
C
C
4. Once the lid cover has been removed the inner parts can
be reached.
5. To reassembly, please follow steps backward.
REPAIR INSTRUCTION
Descaling
Descaling is an important element in Senseo maintenance.
It should be done at least once every 3 months, up to 6 times
a Year!
This will prolong the life of your appliance and will guarantee
optimal brewing results for a long time.
Use the correct descaling agent.
Only citric acid-based descalers are suitable for descaling
the SENSEO
®
machine. This type of descaler descales the
appliance without damaging it. For the correct amount, see
under ‘Descaling procedure’ below. Each descaling mixture
can be used only once. After use, the descaling mixture is no
longer active.
We advise you to use the special SENSEO
®
Descaler
(HD7006). Read the instructions on the package of the
descaling agent.
Never use a descaling agent based on mineral acids such as
sulphuric acid, hydrochloric acid, sulphamic acid and acetic
acid (e.g. vinegar). These descaling agents may damage your
SENSEO
®
coffee machine.
• Follow the steps in the section headed “Descale the
appliance” see DFU (Direction for Use manual)
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
3-9
To Next Page
Loading...
Need help?
General
