Philips SRP3011 User Manual

5EN
5 If the light is off, a valid code is saved.
Otherwise, the light will ash once, and
then remains on for code re-entry.
6 Operate the device with the universal
remote. If your device responds correctly,
it means you have entered the right code.
Otherwise, repeat from step 2, and enter
the second code on the list.
Note
• It is possible sometimes that your device only responds
to some of the buttons. In such case, set up with the
next code in the code list, and try operating your
device again.
Auto registration
1 Switch on your device.
2 Press and hold "1" and "6" at the same time
for 5 seconds until the blue LED is on.
3 Point at your device with the universal
remote. Then press and release to
start searching the code for your brand.
A different infrared signal is sent every 2
seconds as the universal remote searches,
indicated by a blue ash.

Philips SRP3011 Specifications

General

Net weight (outer carton)	1.508 lbs
Gross weight (outer carton)	3.131 lbs
Width outer carton (imperial)	7.6 \
Height outer carton (imperial)	6.3 \
Length outer carton (imperial)	11.5 \
Tare weight outer carton (imperial)	1.623 lbs
Interface	IR Wireless
Input type	Press buttons
Product color	Black
Buttons quantity	30
Backlight buttons	No
Brand compatibility	Any brand
Remote control proper use	DTV, TV
Battery type	AAA
Battery life (max)	8760 h
Battery technology	-
Number of batteries supported	2
Certification	CE Mark
Maximum range	10 m
Frequency range	24 - 55 kHz
Number of devices supported	1
Package weight	170 g

Weight and Dimensions

Weight	113 g