Philips TAT3216 User Manual

Turn on the Bluetooth function
of your Bluetooth device, select
Philips TAT3216.
The following example shows you
how to pair the earpieces with
your Bluetooth device.
Enter the earpieces password
“0000” (4 zeros) if prompted. For
those Bluetooth devices featuring
Bluetooth 3.0 or higher, no need to
enter a password.
Philips TAT3216
Note
Using as a Single earpiece
(Mono mode)
Take either right or Left earpiece out
from charging box for Mono use. The
earpiece will power on automatically.
There will be a voice “Power on” from
earpiece.
Note
 Take the second Earpiece from the charging
box and they will pair each other automatically.
 The earpieces stores 4 device in the memory. If
you try to pair more than 4 devices, the earliest
paired device is replaced by the new one.
Pair the earpieces with
another Bluetooth device
If you have another Bluetooth device
that you want to pair with the earpieces,
make sure the Bluetooth function in any
other previously paired or connected
devices are turned o.
Press and hold multiple function button
for 3 second to enter Bluetooth pairing
mode.

Philips TAT3216 Specifications

General

Brand	Philips
Model	TAT3216
Category	Headphone
Language	English