Philips TAT3508 User Manual

Single earpiece (Mono mode)

from charging box for Mono use. The
earpiece will power on automatically.
Philips TAT3508
The following example shows you
how to pair the earpieces with your
Bluetooth device.
Turn on the Bluetooth function of

Philips TAT3508.
Enter the earpieces' password “0000”

devices featuring Bluetooth 3.0 or

password.
 
and they will pair with each other automatically.
Note
 The earpieces store 4 devices in the memory.

paired device is replaced by the new one.
Note
Pair the earpieces with
another Bluetooth device
If you want to pair another Bluetooth


3 seconds with both earpieces inside and

device as per normal pairing.
7 EN
1
2
Turn on the Bluetooth function of
your Bluetooth device.
Pair the earpieces with your

manual of your Bluetooth device.
 

please put them into pairing mode (press button
on box for 3 seconds with both earpieces inside
and the cover open).
Note
3
4
Note
 
a call from Device 2 will automatically pause

automatically to headphones.
 Ending the call will automatically resume

Multi-point connection
Pairing
 

Switch between device
 
music from 1 device. Another device
will be for phone call.
• Pause the audio from 1 device and
then start to play audio from the
another device.
03"

Philips TAT3508 Specifications

General

Impedance	32 Ω
Driver type	Dynamic
Driver unit	10 mm
Ear coupling	Intraaural
Headphone frequency	20 - 20000 Hz
Maximum input power	5 mW
Noise canceling type	Hybrid
Headphone sensitivity	95 dB
Cable length	0.2 m
Control type	Touch
Headset type	Binaural
Product type	Headset
Product color	White
Wearing style	In-ear
Recommended usage	Calls/Music
Protection features	Water resistant
International Protection (IP) code	IPX4
Wireless range	10 m
Bluetooth version	5.3
Bluetooth profiles	A2DP, AVRCP, HFP
Connectivity technology	True Wireless Stereo (TWS)
Master (outer) case width	255 mm
Master (outer) case height	277 mm
Master (outer) case length	295 mm
Master (outer) case weight	3830 g
Shipping (inner) case width	117 mm
Shipping (inner) case height	119 mm
Shipping (inner) case length	137 mm
Shipping (inner) case weight	410 g
Quantity per master (outer) case	24 pc(s)
Quantity per shipping (inner) case	3 pc(s)
Quantity	1
Cables included	USB Type-C
Eartips material	Silicone
Accessories included in set	3 sizes foam eartips
Battery type	Built-in battery
Battery capacity	55 mAh
Fast charging time	15 min
Battery recharge time	2 h
Number of batteries supported	3
Continuous audio playback time	7 h
Battery capacity (charging case)	400 mAh
Battery technology (charging case)	Lithium Polymer (LiPo)
Continuous audio playback time (with charging case)	21 h
Package type	Box
Package depth	42 mm
Package width	110 mm
Package height	130 mm
Package weight	113 g
Microphone type	Built-in
Battery life	420 min

Weight and Dimensions

Depth	21.4 mm
Width	25.2 mm
Height	25.5 mm
Weight	45 g
Charging case weight	66 g
Charging case dimensions (W x D x H)	62.8 x 28.1 x 35.4 mm