Pioneer 1014TX-K - THX Select A/V Receiver User Manual

VSX-52TX
5
5678
56
7
8
C
D
F
A
B
E
1. SPECIFICATIONS
Specifications
Amplifier section
Continuous average power output of 110 watts* per
channel, min., at 8 ohms, from 20 Hz to 20,000 Hz with
no more than 0.09%** total harmonic distortion (front).
Continuous Power Output
Front .....................110 W + 110 W (20 Hz-20 kHz, 0.09%)
Center .................................110 W (20 Hz-20 kHz, 0.09%)
Surround ..............110 W + 110 W (20 Hz-20 kHz, 0.09%)
Surround back ......110 W + 110 W (20 Hz-20 kHz, 0.09%)
Audio Section
Input (Sensitivity/Impedance)
LINE .................................................... 335 mV/47 kΩ
Frequency Response
LINE ............................. 5 Hz to 100,000 Hz dB
Output (Level/Impedance)
REC .................................................... 335 mV/2.2kΩ
Tone Control
BASS ................................................ ± 6 dB (100 Hz)
TREBLE ............................................. ± 6 dB (10 kHz)
LOUDNESS ....................... +4/+2 dB (100Hz/10 kHz)
(at volume position –40dB)
Signal-to-Noise Ratio (IHF, short circuited, A network)
LINE ................................................................103 dB
Signal-to-Noise Ratio [EIA, at 1W (1kHz)]
LINE ..................................................................83 dB
* Measured pursuant to the Federal Trade Commission’s
Trade Regulation rule on Power Output Claims for Amplifiers
** Measured by Audio Spectrum Analyzer
Composite Video / S-Video Section
Input (Sensitivity/Impedance) ...........................1 Vp-p/75Ω
Output (Level/Impedance) ................................1 Vp-p/75Ω
Signal-to-Noise Ratio ............................................... 65 dB
Frequency Response ......................... 5 Hz to 10 MHz dB
Component Video Sectio
Input (Sensitivity/Impedance) ...........................1 Vp-p/75Ω
Output (Level/Impedance) ................................1 Vp-p/75Ω
Signal-to-Noise Ratio ............................................... 65 dB
Frequency Response ........................ 5 Hz to 40 MHz dB
FM Tuner Sectio
Frequency Range ........................... 87.5 MHz to 108 MHz
Usable Sensitivity ......... Mono: 13.2 dBf, IHF (1.3 µV/75Ω)
50 dB Quieting Sensitivity ......................... Mono: 20.2 dBf
Stereo:38.6 dBf
Signal-to-Noise Ratio .................. Mono: 73 dB (at 85 dBf)
Stereo: 70 dB (at 85 dBf)
Distortion ........................................... Stereo: 0.5% (1 kHz)
Alternate Channel Selectivity .................... 60 dB (400 kHz)
Stereo Separation ......................................... 40 dB (1 kHz)
Frequency Response ..................... 30 Hz to 15 kHz ± 1dB
Antenna Input ........................................... 75Ω unbalanced
AM Tuner Sectio
Frequency Range .............................. 530 kHz to 1,700 kHz
Sensitivity (IHF, Loop antenna) ............................ 350 µV/m
Selectivity ................................................................... 25 dB
Signal-to-Noise Ratio ................................................. 50 dB
Antenna ......................................................... Loop antenna
Miscellaneous
Power Requirements ................................ AC 120 V, 60 Hz
Power Consumption .................................... 480 W, 630 VA
In standby .............................................................. 0.43 W
AC Outlet ........................................ (switched) 100 W MAX.
Dimensions ....................... 420 (W) x 173 (H) x 465 (D) mm
(16
9
/
16
(W) x 6
13
/
16
(H) x 18
5
/
16
(D) in.)
Weight (without package) ...........................15.5 kg (34.2 lb)
Furnished Parts
Microphone (for Auto MCACC setup) ..........................1
Microphone stand ........................................................ 1
AA/LR6 dry cell batteries
................................................ 2
Remote control ..................................................................1
AM loop antenna ............................................................... 1
FM wire antenna ................................................................1
Warranty card ....................................................................1
These operating instructions ..............................................1
Note
• Specifications and the design are subject to possible
modifications without notice, due to improvements.
Cleaning the uni
• Use a polishing cloth or dry cloth to wipe off dust and
dirt.
• When the surface is dirty, wipe with a soft cloth
dipped in some neutral cleanser diluted five or six
times with water, and wrung out well, and then wipe
again with a dry cloth. Do not use furniture wax or
cleansers.
• Never use thinners, benzine, insecticide sprays or
other chemicals on or near this unit, since these will
corrode the surface.

Pioneer 1014TX-K - THX Select A/V Receiver Specifications

General

Brand	Pioneer
Model	1014TX-K - THX Select A/V Receiver
Category	Receiver
Language	English