03 Controls and displays
8
En
Rear panel
See pages 5-6 for details regarding connections.
1 GND (Turntable ground) terminal
This ground terminal is designed to help reduce noise
when a turntable is connected. It is not a safety ground.
2
SPEAKERS A
terminals (Right channel)
3
SPEAKERS B
terminals (Right channel)
4
SPEAKERS B
terminals (Left channel)
5
SPEAKERS A
terminals (Left channel)
6
AC IN
jack
Connect power cord to here and an AC wall socket.
7
PHONO (MM)
IN
terminals
8
TUNER
IN
terminals
9
SACD/CD
IN
terminals
10
AUX
IN
terminals
11
NETWORK
IN
terminals
12
RECORDER IN/OUT
terminals
13
POWER AMP DIRECT
IN
terminals (A-30
only)
When using the A-30 as a power amplifier, connect the
pre-amplifier here (page 10).
14
CONTROL IN/OUT
jack (Except A-10)
To Next Page
Loading...
Need help?
General
