System Firmware Update Instructions For BDP-LX91
NOTE: If you have any difficulty carrying out these instructions, please contact Pioneer Customer
Support Center.
A. Check the current firmware version of the player:
Using the player’s remote control:
1. Press the "STANDBY/ON" button to switch the unit on.
2. If the player starts to play a disc, press the "STOP" button and wait until the Pioneer logo is
displayed on your TV.
3. Press the "Home Menu" button.
4. Select "Initial Setup" and press "Enter"
5. Select "Video Out" then press "Enter"
6. Select "TV Aspect Ratio" then press "Enter"
7. Press the "Blue" button on the remote control.
8. The firmware version of your player will be displayed in the bottom right portion of the TV
screen.
If the version number is 2.73 or higher, it is not necessary to update the firmware.
If the version number is less than 2.73, it is necessary to update the firmware. Please continue to
Step B.
B. Download the firmware ZIP file from Pioneer's website:
Download the firmware ZIP file named "BDP25A_V273.zip" from the website to a folder on your
computer.
C. Create the firmware update disc:
NOTE: Use a brand new CD-R/-RW disc to burn the firmware update. The player may not
be able to correctly read a dirty disc or a disc with scratches.
Items needed to create the firmware update disc:
- A CD-R/-RW drive
- CD-R/-RW creation (writing) software
- One blank CD-R or CD-RW disc
CD-R Disc: You can only use a blank CD-R disc
CD-RW Disc: You can only use a blank CD-RW disc. If the disc has been used, the contents
must be erased before copying the firmware files to it
- Supported OS: Windows: 98, 98SE, Me, 2000, XP, Vista, MacOS
To Next Page
Need help?
General
