Disc playback05
16
En
Basic operations
Advanced CD or MP3 disc playback
Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press repeatedly until “REPEAT ONE” appears. Press
ENTER.
To repeat all tracks:
Press repeatedly until “REPEAT ALL” appears. Press
ENTER.
To repeat desired tracks:
Perform steps 1 - 5 in “Programmed play (CD)” section
(page 17) and then press repeatedly until “REPEAT
ALL” appears. Press ENTER.
To cancel repeat play:
Press repeatedly until “REPEAT OFF” appears. Press
ENTER.
Note
• After performing repeat play, be sure to press ∫.
Otherwise, the disc will play continuously.
• During repeat play, random play is not possible.
Random play
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press RANDOM repeatedly until “RANDOM ON” appears.
Press ENTER.
To cancel random play:
Press RANDOM repeatedly until “RANDOM OFF” appears.
Press ENTER.
Note
• If you press the 9 during random play, you can move
to the track selected next by the random operation.
• In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
• During random play, repeat play is not possible.
Function Main unit Remote
control
Operation
Play
Press in the stop mode.
Stop
Press in the playback
mode.
(when playing a CD)
“RESUME” is
displayed and the
place where you
stopped play is
memorized. Press
again and the
memorized position
is cleared.
Pause
Press in the playback
mode. Press
1;
to
resume playback from
the paused point.
Track up/
down
Press in the playback
or stop mode.
If you press the button
in the stop mode, press
1;
to start the desired
track.
(when playing MP3)
You can only skip
forward or back to
music files inside the
same folder.
Fast
forward/
reverse
Press and hold down in
the playback mode.
Release the button to
resume playback.
SN29402699_X-HM16_26_26D_En_European.book 16 ページ ２０１６年７月２２日 金曜日 午後７時２分
To Next Page
Loading...
Need help?
General
