99
MAINTENANCE
Fuse Replacement
If the engine stops or will not
start, or if you experience other
electrical failures, a fuse may
need replacement. Locate and
correct any short circuits that
may have caused the blown fuse,
then replace the fuse. Spare fuses
are provided in a compartment on
the top of the access door.
1. Open the front box cover.
2. Remove the access panel.
See page 89.
3. Remove fuse box cover.
4. Remove the suspect fuse
from the fuse panel. If the
fuse is blown, install a new
fuse with the same amperage.
5. Secure the fuse box cover
and access panel.
6. Secure the front box cover.
To Next Page
Loading...
Need help?
General
