Polaris 2016 RZR XP Turbo User Manual

110
MAINTENANCE
Suspension Settings
FOX Internal Bypass Shocks
FOX internal bypass shocks are position sensitive and become
progressively stiffer as the suspension compresses. To maintain the
intended ride comfort it is important that ride height is maintained to the
factory setting.
Adding extra weight to the vehicle will decrease ride height and cause
the shock to operate in the stiffer bypass zones. To correctly compensate
for added cargo or accessory weight, spring preload should be added to
keep the shock in the optimal zone and maintain ground clearance.
Refer to the following adjustment table to correctly compensate for
weight added to the vehicle.
NOTE: These settings are only guidelines. The spring preload and shock
clickers can be adjusted further to match your personal riding style and
location of weight on the vehicle.
FOX Internal Bypass Shock Adjustments
RZR XP Turbo
Weight Condition
assuming each rider, wearing
gear, is 215 lbs. (97.5 kg)
Spring Preload
Adjustment
Front
Shock
Rear
Shock
Riders Cargo +
Accessories
Shaded cells indicate factory settings
Driver only 0 Remove 0.2 inch (5 mm)
preload, front and rear
16 clicks out 16 clicks out
Driver + 1 0
Factory default preload 12 clicks out 12 clicks out
Driver + 1 100 lbs.
(45 kg)
Add 0.2 inch (5 mm)
preload, front and rear
10 clicks out 10 clicks out
Driver + 1 200 lbs.
(91 kg)
Add 0.4 inch (10 mm)
preload, front and rear
8 clicks out 8 clicks out
Driver + 1 300 lbs.
(136 kg)
Add 0.6 inch (15 mm)
preload, front and rear
6 clicks out 6 clicks out

Polaris 2016 RZR XP Turbo Specifications

General

Brand	Polaris
Model	2016 RZR XP Turbo
Category	Offroad Vehicle
Language	English