40
THE PERFECT FIT
EDGE Rear Suspension Adjustments
Rear Shocks
Polaris Position Sensitive Shock
There are no external adjustments on the Polaris position sensitive
(PPS) shock. There is a performance PPS shock kit available for
increasing damping, however. If you desire to have the internal valving
changed, consult your dealer, or refer to the suspension troubleshooting
decal located under the hood or on the clutch guard.
FOX Position Sensitive Clicker Shock
The FOX position sensitive
clicker shock is available as
an option on some models.
Adjustments to the compres-
sion damping are made by
turning the clicker knob on
the shock reservoir.
Eight positions are labeled
on the knob. Position #1 is
the softest, or least compres-
sion damping. Position #8 is
the stiffest, or most com-
pression damping. When
adjusting, we recommend
that you turn the clicker only
one click at a time, then test
ride.
Clicker Knob
To Next Page
Loading...
Need help?
General
