EasyManuals Logo
Home>Polaris>Offroad Vehicle>500 IQ Shift

Polaris 500 IQ Shift User Manual

Polaris 500 IQ Shift
121 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
73
MAINTENANCE
Fuel Filter/Fuel Lines
See your Polaris dealer for replacement of the under-tank fuel filter
every 1000 miles (or annually).
Inspect the fuel lines regularly for signs of deterioration or damage.
Always check fuel line condition after periods of storage. Normal dete-
rioration from weather and fuel compounds may occur. Replace worn or
damaged fuel lines promptly.
NOTICE: Kinking the fuel lines or using a pliers or similar tools to remove fuel
lines may cause damage to the lines. If a fuel line has been damaged
or kinked, replace it promptly.
n Cooling System
Inspect the fan intake and outlet edge seal at the input and output for
cracks, loosening of duct and blockage or obstructions. Make any neces-
sary repairs promptly.
Exhaust System
Check the exhaust system for wear or damage at approximately 2000
miles (3200 km). Always allow the engine and exhaust system to cool
completely before inspecting.
CAUTION! Hot exhaust system parts can cause burns. Allow adequate time for
the exhaust system to cool. Never perform this procedure with the engine
running.
1. Open the hood and inspect the muffler and pipes for cracks or dam-
age.
2. Check for weak or missing retaining springs or damper/support
grommets.
3. Check for loose clamps on the pipe covers.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris 500 IQ Shift and is the answer not in the manual?

Polaris 500 IQ Shift Specifications

General IconGeneral
BrandPolaris
Model500 IQ Shift
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals