124
MAINTENANCE
Steering System
Ski Alignment
With the handlebars in a straight ahead position, and with vehicle
weight compressing the suspension, measure from the straight edge of
the skis at the center of the ski mounting bolt. The measurement
between the skis at point X should be 1/8I to 1/4I (3-6 mm) greater
than the measurement at point Y.
NOTE: If the skis are misaligned, we recommend that your dealer cor-
rect the alignment, since camber adjustment may also be
affected.
WARNING
Improper ski alignment or adjustment may cause loss of steering control,
resulting in serious injury or death. Do not attempt to change the ski align-
ment or camber adjustment. See your Polaris dealer.
10I
X
Y
10I
To Next Page
Loading...
Need help?
General
