EasyManuals Logo
Home>Polaris>Offroad Vehicle>600 SWITCHBACK

Polaris 600 SWITCHBACK User Manual

Polaris 600 SWITCHBACK
142 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #65 background imageLoading...
Page #65 background image
63
PRE-RIDE INSPECTIONS
Before Starting the Engine
Brakes
Always check the following items for proper operation before starting
the engine.
Brake Lever Travel
Squeeze the brake lever. It
should move no closer to the
handgrip than 1/2 inch (1.3
cm). A smaller distance indi-
cates low brake fluid level or
air in the hydraulic system.
Refer to the brake bleeding
information on page 98 or
see your dealer for service.
Lever Feel
If the brake lever feels “spongy” when squeezed, check the brake fluid
level and condition. Add fluid as needed. See page 97.
WARNING! Continued use of “spongy” brakes may cause a complete loss of
brakes, which could result in serious injury or death. Always have the brakes
serviced at the first sign of sponginess.
1/2” (1.3 cm)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris 600 SWITCHBACK and is the answer not in the manual?

Polaris 600 SWITCHBACK Specifications

General IconGeneral
BrandPolaris
Model600 SWITCHBACK
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals